Car Sound Deadening Mats and Sheets

Kool Wrap Roller Sound Deadener ApplicatorSKU: KW0951
$22.50 Add to cart
Kool Wrap Adhesive Van Liner Heat Sound Shield Insulation 10mm Foam & Foil 1.0m ×5.0mSKU: KW0908
$159.00 Add to cart
Kool Wrap Car Sound Deadener Kit Pack Heat Proof Adhesive Silver Foil 0.64m2 (4 sheets)SKU: KW0924
$39.00 Add to cart
Kool Wrap Car Sound Deadener Kit Pack Heat Proof Adhesive Silver Foil 3.94m2SKU: KW0919
$189.50 Add to cart
Kool Wrap Car Sound Deadener Kit Pack Heat Proof Adhesive Silver Foil 1.92m2SKU: KW0918
$99.50 Add to cart

Which Pack Size You Need

Four Sheets

0.64 square metres. A pair of front door skins, or one boot floor. This is the starter pack and the one most people buy first, because doors give the most noticeable change for the least work.

Twelve Sheets

1.92 square metres, supplied with a free roller. Enough for a car floor pan, or all four doors. If you are doing one job properly rather than sampling, start here.

Twenty-Four Sheets

3.84 square metres. A full cabin floor, all four doors and the boot, or the base layer of a small van or 4WD fit-out.

The Roller

Every sheet needs pressing down hard along its edges and across its whole face. A hand roller does this in seconds and does it evenly. The 12-sheet pack includes one. Add it to your order if you are buying any other pack size.

Where It Goes

Panel	How Much to Cover	Why
Floor pan	100 per cent	The largest panel, closest to the road, and the easiest to reach once the carpet is out.
Door skins	The flat inner skin, behind the trim	Doors are thin, unsupported and the closest hard surface to your ear.
Boot floor and wheel arches	100 per cent of the flat sections	Road and tyre noise arrives here first.
Roof and side panels	Sections in the centre of each panel, around 20 to 30 per cent	Large panels drum in the middle. The edges are already braced by the structure.
Firewall	The flat cabin side, where you can reach it	Engine noise comes through here.

You do not need full coverage everywhere. Mass in the middle of a panel stops it ringing. Mass on a braced edge does very little.

Sound Deadening and Heat Are Two Different Jobs

A sound deadening mat adds mass. An insulation layer adds thickness. They fix different problems and most vehicles want both.

Use the deadener on bare metal first. If you also want to keep heat out, add van liner foam or foil bubble insulation over the top, not instead. For heat coming off the exhaust into the floor, that is a heat shield job and no amount of deadener replaces it.

What We Do Not Sell

Kool Wrap does not sell a sprayable sound deadener. If you want a spray-on product, this is not the range. Our sheets are the self-adhesive kind, cut with scissors and pressed on by hand.

Before You Order

Measure your panels. Floor pans vary more between models than people expect and it is cheaper to order once. Call 1300 44 33 34 or email sales@koolwrap.com.au and we will tell you which pack fits your car.

Kool Wrap has supplied heat and sound protection in Australia since 1995. We ship Australia-wide with tracking sent after dispatch, from our office in Rowville, Victoria.